Directory USR1:[ADVAX.EDGR.DEMO] ACAD2.HPG HPGL from Autocad ACAD2_B.HPG ACAD2.HPG broken with brline ACE2.HPG HPGL from Daisy ACE schematic editor (via PLOTMF metafile) ACE2_S.HPG ACE2.HPG split at semicolons DASH.HPG HPGL from DASH - different file DLAB_S.HPG HPGL from Daisy DLAB digital simulator (via PLOTMF), split at semicolons PWB.HPG HPGL from Daisy PWB board layout editor (via PLOTMF) PWBNF.HPG HPGL from Daisy PWB (via PLOTMF with -NF (no fill) option)) PWB_S.HPG PWB.HPG split at semicolons PWBNF_S.HPG PWBNF.HPG split at semicolons SCOPE_B.HPG HPGL from Tektronix 11340 digital scope, captured with the Kermit log utility and broken with brline. PROTEL_B.HPG HPGL from PROTEL schematic capture program PSPICE.HPG HPGL from DOS P-SPICE simulator QUATTRO_B.HPG HPGL from QUATTRO spreadsheet EDGR.HPG HPGL from EDGR brline is a C program written by Peter Bennett, which inserts extra linefeeds into a long character stream, after commas. Splitting the Daisy files is done with the unix command tr ';' '\015' < infile > outfile (Daisy uses CR, not LF. Subsequently done tr '\015' '\012' ) It was not possible to transfer the original SCOPE.HPG with ftp due to excessive line length (possibly 50000 characters). 1.HPG HPGL from Daisy ACE *_nfl.hpg Various HPGL files munged to replace spaces and linefeeds