11 Application notes

Most of the following applications have been digitally simulated on the Daisy workstation. Only one prototype application has currently (November 1991) been tested. In particular, the user-side arbitration (AN#6), Multiblock (AN#8) and Master operation (AN#12) have not been tested.

• 11.1 Application Note #1 - Using OBPS
• 11.2 Application Note #2 - Implementing Read-Only Locations
• 11.3 Application Note #3 - Reset and Clear Signals
• 11.4 Application Note #4 - Use of the Protective Buffer
• 11.5 Application Note #5 - Advanced and CERN Modes
• 11.6 Application Note #6 - User Side Arbitration
• 11.7 Application Note #7 - Defeating Parity Logic
• 11.8 Application Note #8 - Multiblock operation
• 11.9 Application Note #9 - Use of IBSY
• 11.10 Application Note #10 - Board Layout
• 11.11 Application Note #11 - Broadcast Operations
  • 11.11.1 Disconnect on Unimplemented Secondary Address
  • 11.11.2 SS codes
• 11.12 Application Note #12 - Implementing a Master
• 11.13 Application Note #13 - Use of IFAT for Broadcast Case 8
• 11.14 Application Note #14 - Example of CSR#0 Implementation
• 11.15 Application Note #15 - Implementing an Address Decoder
• 11.16 Application Note #16 - Simple FASTBUS Slave Implementation