Next: 9.1 Introduction
Up: No Title
Previous: List of Figures
Some changes were made to the gate array Rev. 0 to bring it to Rev. 1.
Changes which affect operation of the device are as follows:
- A skirt width of 3 is now partly supported. See page
.
- The ordering of the cluster header bytes is changed
- A flag is set in Status Register 3 to indicate Rev. 1
Analysis software may test for the Rev. 1 flag in order to correctly decode
the cluster header bytes (see table 9 on page ).
Other changes were made to eliminate problems with the cluster building
logic, but do not affect device operation.
Next: 9.1 Introduction
Up: No Title
Previous: List of Figures